Ricoh 106 Benutzerhandbuch
17
GETTING ACQUAINTED
2. GETTING
ACQUAINTED
3
The machine has handhold at the loca-
tions shown in the illustration. Note that
the illustration shows the machine as
viewed from above.
tions shown in the illustration. Note that
the illustration shows the machine as
viewed from above.
4
Carefully lower the machine onto the
paper feed unit, making sure that the
dowels on the paper feed unit fit into
holes in the bottom of the machine
properly.
paper feed unit, making sure that the
dowels on the paper feed unit fit into
holes in the bottom of the machine
properly.
CAUTION
When lifting the machine, make sure your
hands are at the locations indicated by “
hands are at the locations indicated by “
*
” in
the illustration. This protects against pinching
your fingers between the machine and paper
feed unit.
your fingers between the machine and paper
feed unit.
• This illustration shows the handhold lo-
cation on the right side of the machine.
• This is the handhold location on the left
side of the machine.
Note
After the above installation, attach the power cord to the machine, and plug the
other end into an outlet. Refer to page 8 for details.
other end into an outlet. Refer to page 8 for details.