Ricoh 106 Benutzerhandbuch
7
SETTING UP
1. SETTING UP
Connecting to a Computer
Important!
Make sure that the power of both the machine and your computer is turned off
before making the connection.
before making the connection.
1
Plug one end of the provided parallel
cable into the lower port on the side of
the machine, and secure it in place as
shown in the illustration.
cable into the lower port on the side of
the machine, and secure it in place as
shown in the illustration.
Note
• The machine must be connected to a com-
puter for printing.
• Use the cable that comes with the machine
to connect to your computer.
2
Connect the other end of the parallel
cable to your computer’s parallel
printer port.
cable to your computer’s parallel
printer port.
b(GB)6.5_Chapter 01_p01-09
99.8.3, 1:12 PM
7