3M 2250M-iD Benutzerhandbuch

 50 

78-8130-6150-0 Rev G

Step 6.  The operator may select User Edit in order 

to ‘type’ the modification, or Delete Row to 

remove the entire row from the template, or 

select Show All to display a list of common 

compressed terms. 

less memory in the marker.
Step 7.  Select an option from the list by pressing the 

up/down arrows [SK]. Press Locate/OK [5].

Step 8.  If User Edit is selected, the following 

display will appear.

Step 9.  Move the boxed cursor to the ‘back arrow’ 

and press Select [SK] to delete the entry to 

be modified.

Step 10. Move the boxed cursor by pressing the left/

right arrows [SK], or the Up/ Down Arrow 

[SK], to move the cursor to the next row.

Step 11. Press Select [SK] to enter the alphanumeric 

character.

 

− Entry will appear at the top of the display.

Step 12. Press Locate/OK [5] when entry is complete.

Step 13. If Show All is selected, the following display 

will appear.

Step 14. Select a common compressed term from the 

list by pressing the up/down arrows [SK].

Step 15. Press Locate/OK [5]. The modification will 

automatically populate the marker template.

The operator can retrieve the data from the iD marker by pressing Read [SK] on the 

Marker Locate display.
The receiver tip should be lowered to the ground to reach maximum read depth.
If more than one 3M

™

 iD Marker of the same utility is detected, the receiver will read 

the first marker and display the data from the marker.