3M 2273M Benutzerhandbuch

 18 

78-8130-6150-0 Rev G

In the setup mode, the units of depth measurement, time, date, and date format can be 

set. The receiver can be configured to detect only certain frequencies and/or specific 

utility markers (3M

™

 Dynatel

™

 Receivers 2250M-iD and 2273M-iD only). User defined 

frequencies can be programmed, language of the receiver can be selected, and tone 

frequencies set.

A. Select Depth Units

MENU [6] + >>More [SK:4] + Setup [SK:6] + Units [SKToggle:6a]

1.  Press Units [SK toggle:6a].
2.  The soft key command will toggle between 

inches (in), centimeters (cm), and feet/inches 

(ft-in).

3.  Press Locate/OK [5].

B. Setting the Receiver Clock

Set the time, date, and date format of the receiver. Depth and Current measurements are 

time and date stamped, as well as read write marker information (iD units only).
MENU [6] + >>More [SK:4] + Setup [SK:6] + Clock [SK:6b]

1.  Press the left/right arrow [SK] to highlight the 

digit of the date or time to change.

2.  Press the + or - [SK] to increment or decrement. 
3.  When the date format is highlighted, the format 

will toggle between mm/dd/yy and dd/mm/yy.

4.  Press Locate/OK [5] to save, or Menu [6] to 

cancel.

C. Selecting a Language

MENU [6] + >>More [SK:4] + Setup [SK:6] + Lang [SKToggle:6c]

The soft key command will cycle through available languages. Press Locate/OK [5]. 

Alternate languages can be uploaded to the receiver using the 3M

™ 

Dynatel

™

 PCTools 

Software. The 3M

™

 Dynatel

™

 PC Tool Kit Software is available free of charge at 

www.3M.com/dynatel under the Software section; 2550/2573/2250M/2273M/1420 

Locator PC Tools xx.x.x (EXE xx.xMB).