Transition Networks CGETF10XX-10X Benutzerhandbuch

The physical characteristics must meet or exceed IEEE 802.3™ specifications. 

Bit Error Rate:  

<10-9

Single mode fiber (recommended):

9 µm 

Multimode fiber (recommended):

62.5/125 µm 

Multimode fiber (optional):  

100/140, 85/140, 50/125 µm 

CGETF1013-105

850 nm multimode

Fiber Optic Transmitter Power:

min: -10.0 dBm

max: -4.0 dBm

Fiber Optic Receiver Sensitivity:

min: -17.0 dBm

max: 0.0 dBm

Link Budget:

7.0 dB

CGETF1014-105

1310 nm single mode

Fiber-optic Transmitter Power:

min: -13.0 dBm

max: -3.0 dBm

Fiber-optic Receiver Sensitivity:

min: -20.0 dBm

max: -3.0 dBm

Link Budget:

7.0 dB

CGETF1015-105

1310 nm single mode

Fiber-optic Transmitter Power:

min: -5.0 dBm

max: -0.0 dBm

Fiber-optic Receiver Sensitivity:

min: -20.0 dBm

max: -3.0 dBm

Link Budget:

15.0 dB

CGETF1017-105

1550 nm single mode

Fiber-optic Transmitter Power:

min: -3.0 dBm

max: +2.0 dBm

Fiber-optic Receiver Sensitivity:

min: -23.0 dBm

max: -3.0 dBm

Link Budget:

20.0 dB

CGETF1018-105

850 nm multimode

Fiber Optic Transmitter Power:

min: -10.0 dBm

max: -4.0 dBm

Fiber Optic Receiver Sensitivity:

min: -17.0 dBm

max: 0.0 dBm

Link Budget:

7.0 dB

CGETF1024-105

1300 nm extended multimode

Fiber-optic Transmitter Power:

min: -10.0 dBm

max: -3.0 dBm

Fiber-optic Receiver Sensitivity:

min: -17.0 dBm

max: -3.0 dBm

Link Budget:

7.0 dB

CGETF1029-105

1310nm TX / 1550nm RX single mode 

CGETF1029-106

1550nm TX / 1310nm RX single mode

Fiber-optic Transmitter Power:

min: -8.0 dBm

max: -3.0 dBm

Fiber-optic Receiver Sensitivity:

min: -21.0 dBm

max: -3.0 dBm

Link Budget:

13.0 dB

CGETF1029-107

1310nm TX / 1550nm RX single mode 

CGETF1029-108

1550nm TX / 1310nm RX single mode

Fiber-optic Transmitter Power:

min: -3.0 dBm

max: +2.0 dBm

Fiber-optic Receiver Sensitivity:

min: -23.0 dBm

max: -8.0 dBm

Link Budget:

20.0 dB

CGETF1035-105

1550 nm single mode

Fiber-optic Transmitter Power:

min: 0.0 dBm

max: +5.0 dBm

Fiber-optic Receiver Sensitivity:

min: -27.0 dBm

max: -3.0 dBm

Link Budget:

27.0 dB

8

24-hour Technical Support: 1-800-260-1312   International: 00-1-952-941-7600    

9 

techsupport@transition.com -- Click the “Transition Now” link for a live Web chat.

CGETF1039-105

850 nm multimode

Fiber Optic Transmitter Power:

min: -9.0 dBm

max: -4.0 dBm

Fiber Optic Receiver Sensitivity:

min: -17.0 dBm

max: -17.0 dBm

Link Budget:

8.0 dB

• Gauge = 24 to 22 AWG; Attenuation = 22.0 dB /100m @ 100 MHz
• Straight-through  OR  crossover cable may be used.
• Shielded twisted-pair (STP) OR unshielded twisted-pair (UTP) may be used
• All pin pairs (1&2, 3&6, 4&5, 7&8) are active in a gigabit network.
• Use only dedicated wire pairs for the active pins; e.g., blue/white & white/blue,

orange/white & white/orange, etc.

• Do not use flat or silver satin wire.

For Transition Networks’ Model CGETF10xx-10x or equivalent

Standards:

IEEE 802.3ab™, IEEE 802.3 2000

Data Rate / Delay:

1000 Mbs/300 nsec

Dimensions:

3.4" x 0.87" x 4.8" (86mm x 22mm x 122mm)

Weight:

3 oz. (91 g) approximate

Power Consumption:

5.4W, 450mA @ 12VDC

Packet Size:

10 Kbytes (maximum)

MTBF

381,000 hours (MIL217F2 V5.0) (MIL-HDBK-217F)
1,344,000 hours (Bellcore7 V5.0)

Operating Temp:

Tmar* 0°C  to 50°C (32°F to 122°F)*

Storage Temp:

-15°C  to 65°C (5°F to 149°F)

Humidity:

10% to 90%, non condensing 

Altitude:

0 to 10,000 feet

Warranty:

Lifetime

*Manufacturer’s rated ambient temperature.  “Tmra” range for this slide-in-module depends
on the physical characteristics and the installation configuration of the Transition Networks
PointSystem™ chassis in which this slide-in-module  will be installed.

The information contained in this user’s guide is subject to change. For the most up-to-date
information on the CGETF10xx-10x media converter, view the user’s guide on-line at:
www.transition.com.

CAUTION:  Visible and invisible laser radiation when open. Do not stare into beam or
view directly with optical instruments.

CAUTION:  Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.

The fiber optic transmitters on this device meet Class I Laser safety requirements per IEC-
825/CDRH standards and comply with 21 CFR1040.10 and 21CFR1040.11.