Panasonic AJ-HPM110E Benutzerhandbuch

Seite von 168
Setup: Item Settings
139
 Se
tup
This menu is used for menu settings. 
* An underlined setting indicates an initial value.
890
DIF AUD OUT
0000
0001
CH1+2
CH3+4
Specifies the output channels when the audio signals are in 4-channel mode and output 
in the DVCPRO (25 Mbps) format and a DV clip is played back. 
0: CH1 and CH2
1: CH3 and CH4
MENU
Item
Setting
Settings and brief function description
Remarks
FR
No.
SUPER
DISP.
FR
No.
SUPER 
DISP.
A00
LOAD
0000
0001
0002
0003
USER2
USER3
USER4
USER5
Specifies user files loaded in USER 1. 
0: Loads the contents of USER 2
1: Loads the contents of USER 3
2: Loads the contents of USER 4
3: Loads the contents of USER 5
NOTE: 
Pressing the MENU button when loading completes opens a 
confirmation screen. Press the SET button to store the setting. Press 
the EXIT button to discard the change and retain the setting.
Setting available 
for USER1 only
A01
SAVE
0000
0001
0002
0003
0004
USER2
USER3
USER4
USER5
LOCKED
Specifies the user file that saves USER 1 settings. 
0: Saved to USER 2
1: Saved to USER 3
2: Saved to USER 4
3: Saved to USER 5
4: Appears when all user files are write protected. 
NOTE: 
• A user file in change prohibit status cannot be selected. 
• When all user files are in the change prohibit status, “LOCKED” 
appears and data cannot be saved.
Setting available 
for USER1 only
A02
P.ON LOAD
0000
0001
0002
0003
0004
OFF
USER2
USER3
USER4
USER5
Specifies which user files will be loaded into USER 1 and whether or 
not the USER 1 settings should be used in startup when the power is 
turned on. 
0: Operation is started with the settings of the previously set user file.
1: The content of USER 2 is loaded into USER 1.
2: The content of USER 3 is loaded into USER 1.
3: The content of USER 4 is loaded into USER 1.
4: The content of USER 5 is loaded into USER 1.
Setting available 
for USER1 only
A03
MENU LOCK
0000
0001
OFF
ON
Sets/releases the user file (USER2 - USER 5) lock mode. 
0: Releases the lock. (File data can be changed.)
1: Lock is engaged. (File data cannot be changed.)
NOTE: 
• USER 1 cannot be locked.
• Files can be loaded from the SD memory card even if they are 
locked. The status after load operation depends on the setting 
defined by the loaded data.
Setting available 
for USER2 to 
USER5 only
A04
PF1 ASSIGN
Registers a setup menu item in the PF1 button. 
A05
PF2 ASSIGN
Registers a setup menu item in the PF2 button.
A06
PF3 ASSIGN
Registers a setup menu item in the PF3 button.
A10
CARD READ
Select files from the four SD memory card files to load into the menu.
This function is available only to USER 1-5 (SYSTEM) and USER 1-5. 
Setting available 
for USER1 only
Item
Setting
Settings and brief function description
FR
No.
SUPER
DISP.
FR
No.
SUPER 
DISP.
59.94Hz
50Hz
only