Dixon RAM XS6025 / 968999723 Benutzerhandbuch
LUBRICATION
English
-
50
IMPORTANT INFORMATION
Used engine oil is a health hazard and
must not be disposed of on the ground or
in nature; it should always be disposed
of at a workshop or appropriate disposal
location.
must not be disposed of on the ground or
in nature; it should always be disposed
of at a workshop or appropriate disposal
location.
Avoid skin contact; wash with soap and
water in case of spills.
water in case of spills.
WARNING!
Engine oil can be very hot
if it is drained directly after
stopping the engine. Allow
the engine to cool to a safe
temperature fi rst.
if it is drained directly after
stopping the engine. Allow
the engine to cool to a safe
temperature fi rst.
Engine Oil
5. Engine Oil Filter
Drain the engine oil in accordance with the
•
work description under the heading Engine
Oil/Change Engine Oil.
Oil/Change Engine Oil.
Remove the oil fi lter. If necessary, use a
•
fi lter remover.
Wipe new, clean engine oil onto the seal
•
for the new fi lter.
Mount the fi lter by hand with +¾ turn.
•
Run the engine warm, then check that
•
there are no leaks around the oil fi lter seal.
Check the oil level in the engine, fi ll
•
if necessary. The oil fi lter holds 0.1 qt (0.1
liters) of oil.
liters) of oil.
Changing the oil fi lter
8011-734
4. Deck outer spindle
Lubricate using a grease gun, one zerk, each side 2-3
strokes. Use only good quality bearing grease.
strokes. Use only good quality bearing grease.
8011-733
Deck outer spindle (with belt shield removed)