Toshiba MEGF10S Benutzerhandbuch
146
Reset
If the issue cannot be resolved after taking the above corrective actions, reset the
main unit by following the steps below:
main unit by following the steps below:
1
Unplug the AC adapter from the main unit.
2
Turn “OFF” the BATTERY switch once. After about 5 second turn “ON”
again.
again.
The date and time will be reset.
Other settings don’t return to the initial state.
Execute “SETUP” - “SYSTEM” - “FACTORY DEFAULT SETTINGS” to return to the
initial setting in order to return to the initial setting.
Other settings don’t return to the initial state.
Execute “SETUP” - “SYSTEM” - “FACTORY DEFAULT SETTINGS” to return to the
initial setting in order to return to the initial setting.
The charge indica-
tor doesn’t illumi-
nate, in charging
operation.
tor doesn’t illumi-
nate, in charging
operation.
The BATTERY switch
is set to “OFF”.
is set to “OFF”.
Set the BATTERY
switch to “ON”.
switch to “ON”.
The gigabeat is not
connected properly.
connected properly.
Check the connection
between the AC
adapter/AC cable and
the main unit.
between the AC
adapter/AC cable and
the main unit.
Outside the specified
operating-tempera-
ture range.
operating-tempera-
ture range.
Charge within the oper-
ating-temperature
range.
ating-temperature
range.
The charge indica-
tor turned off while
the AC adapter
was connected.
tor turned off while
the AC adapter
was connected.
The charge is auto-
matically stopped to
limit the temperature
increase in the giga-
beat.
matically stopped to
limit the temperature
increase in the giga-
beat.
This is a safety feature.
Keep the gigabeat in the
charging operation.
Charging will resume
after a while.
Keep the gigabeat in the
charging operation.
Charging will resume
after a while.
The PC does not
recognize the
gigabeat.
recognize the
gigabeat.
The gigabeat is not
properly connected to
the PC.
properly connected to
the PC.
Check the connection
with the PC.
with the PC.
Issue
Cause
Solution
Refer