G-Technology 0G02057 Benutzerhandbuch

G-SPEED Q is set up at the factory for use with 
Mac OS X systems.  If you are running Mac OS X,  
G-SPEED Q will mount on the OS X desktop right 
out of the box.  If it becomes necessary to re-
format  G-SPEED Q for Mac OS X, go here.

 

 

G-SPEED Q must be formatted for the Windows 
Operating System before using the G-SPEED Q. 

For more information about using the G-SPEED Q 
for Windows XP, Windows Vista or Windows 7 use, 

G-SPEED Q attaches to your computer via an eSATA, USB 2.0 
or FireWire 800 port. FireWire 400 connectivity is handled by a 
9 to 6 pin cable (included). Choose the connection 
appropriate for your system and connect G-SPEED Q with the 
supplied cable. Connect the supplied power cord to the 
Power Supply and plug the other end into a surge protector 
or wall outlet. Turn on the power switch and the G-SPEED Q 
will mount on the desktop.

Supported RAID Levels
The G-SPEED Q is configured as a RAID 5 array at the factory. 
The unit also supports RAID 0 configuration. If you wish to 
change the RAID level, please refer to the section entitled: 
“Changing the G-Technology RAID Controller Mode”.

5