Beko DPU 8360 W Benutzerhandbuch

28 EN

There are dampness sensors in the 
machine that detect whether the laundry 
is dry or not.
To clean the sensors:
1.  Open the loading door of the 

machine.

2.  Allow the machine to cool down if it is 

still hot due to the drying process.

3.  Wipe the metal surfaces of the sensor 

with a soft cloth, dampened with 
vinegar and dry them.

C

 Clean metal surfaces of the sensors 4 

times a year.

C

 Do not use metal tools when cleaning 

metal surfaces of the sensors.

A

 Never use solvents, cleaning agents 

or similar substances for cleaning due 
to the risk of fire and explosion! 

Dampness of the laundry is removed and 
condensed during drying process and the 
water formed accumulates in the water 
tank. Drain the water tank after each 
drying cycle.

A

 Condensed water is not drinkable! 

A

 Never remove the water tank when 

the programme is running!

If you forget to drain the water tank, the 
machine will stop during the subsequent 
drying cycles when the water tank is full 
and the Water Tank warning symbol will 
flash. If this is the case, drain the water 
tank and press Start / Pause / Cancel 
button to resume the drying cycle.
To drain the water tank:
1.  Pull the drawer and remove the water 

tank carefully.

2.  Drain the water in the tank.

3.  If there is lint accumulation in the 

funnel of the water tank, clean it 
under running water. 

4.  Place the water tank into its seat. 

Lint and fibre that could not be captured 
by the lint filter are blocked in the filter 
drawer behind the kick plate. Filter 
Drawer Cleaning warning light will light up 
maximum at every 5 drying cycles as a 
reminder.
There is a two-level filter in the filter 
drawer. The first level is the filter drawer 
sponge and the second level is the filter 
cloth.
To clean the filter drawer:
1.  Press the kick plate button to open 

the kick plate.