Sony UP-DF500 Benutzerhandbuch

A

d

jus
tment

Menu Operation

15

You can set the following items using the relevant menu:
• Confirming information (INFORMATION) (page 15)
• Adjusting the print quality (PRINT QUALITY) 

• Calibration (CALIBRATION) (page 16)
• Adjusting the density (DENSITY ADJ) (page 17)
• Selecting a gamma curve (GAMMA SEL) (page 19)

• The next printout will be printed with the values most 

recently set. You cannot adjust the setting during 
printing. Once you have adjusted and stored the 
settings, the printer operates according to those 
settings until their values are modified.

• If you do not press any button for approximately 15 

seconds after pressing the MENU button, the printer is 
automatically reset to standby status.

You can confirm the IP address and the total number of 
prints made since you started the unit.

Press the MENU button.

Display the INFORMATION menu by pressing the 
F or f button, then press the g button.

Select the item you want to confirm by pressing the 
F or f button.

Select IP ADDRESS.

You can change the IP address using the browser on 
the computer used to manage the unit.
For details, see the Setup Manual.

Select TOTAL PRINTS.

This item is useful to estimate when regular 
maintenance such as replacing the cleaning roller, 
cleaning the thermal head, etc., is necessary.
For details, see “Maintenance” (on page 20).

You can adjust the sharpness of the printout.

Press the MENU button.

Display the PRINT QUALITY menu by pressing 
the 

F or f button, then press the g button.

IP address

Total number of prints