Nikon D3000KIT Benutzerhandbuch

Seite von 216
184
n
This card is not formatted. 
Format card?
T
(blinks)
Format card or turn camera off and insert new 
memory card.
21
Card is full
j
(blinks)
• Reduce quality or size.
50
• Delete photographs.
33, 
101
• Insert new memory card.
20
● 
(blinks)
Camera can not focus using autofocus. Change 
composition or focus manually.
28, 
42, 48
Subject is too bright.
q
• Use a lower ISO sensitivity
62
• Use commercial ND filter
• In mode:
Increase shutter speed
69
Choose a smaller aperture (larger f-number)
70
Subject is too dark.
r
• Use a higher ISO sensitivity
62
• Use flash
58
• In mode:
Lower shutter speed
69
Choose a larger aperture (smaller f-number)
70
No Bulb in S mode.
A
(blinks) Change shutter speed or select manual exposure 
mode.
69, 71
&
(blinks)
N
(blinks)
Flash has fired at full power. Check photo in 
monitor; if underexposed, adjust settings and try 
again.
Flash is in TTL mode. Choose 
another setting or use a CPU 
lens.
Change flash mode setting on optional flash unit 
or use CPU lens.
157
N/s
(blinks)
• Use the flash.
58
• Change distance to subject, aperture, flash 
range, or ISO sensitivity.
61, 
62, 70
• Optional SB-400 flash unit attached: flash is in 
bounce position or focus distance is very short. 
Continue shooting; if necessary, increase focus 
distance to prevent shadows from appearing in 
photograph.
Flash error
Error occurred updating firmware for optional 
flash unit. Contact Nikon-authorized service 
representative.
Indicator
Solution
0
Monitor
Viewfinder