Konica Minolta VECTISS100 Benutzerhandbuch

REMOTE-CONTROL (optional)

CONTINUOUS-DRIVE MODE

1. Press the drive-mode

button until

appears

in the data panel.

In this mode, the camera continues to release the shutter and
advance the film as long as the shutter-release button is held
down.

2. Press the shutter-release

button down and hold.

• When taking flash pictures, the shutter will release after the

flash is charged.

• When the subject is moving, the shutter will release after the

camera focuses on the subject.

• To cancel continuous-drive mode, press the continuous-drive

mode button until the drive-mode indicator disappears from the
data panel, or turn the camera off.

1. Place the camera on a

tripod, then press the
remote-control button
until

appears in the

data panel.

The IR Remote Control RC-3 is an optional accessory you
can purchase to operate your camera from up to 6 m (19.7 ft.)
away.

2. Arrange the camera and

subject positions, then
compose your picture.

3. Point the emitter window

toward the front of the
camera and press the • or
2s button.

• If the • button is pressed, the lamp on the front of the camera

will blink once before the picture is taken.

• If the 2s button is pressed, the lamp on the front of the camera

will blink for two seconds before the shutter releases.

Emitter window

2s delay button

Release button