Hitachi CU-HD1000 Benutzerhandbuch
9
Function menu
CU-FUNCTION menu
TV FORMAT menu
NOTICE:
The cursor is moved to an arbitrary format with an upper and lower switch, and when TV FORMAT is set, a right and left
switch is operated, and set. The ☑ mark is displayed by pushing a right and left switch, and TV FORMAT is changed.
After TV FORMAT is set, it saves the setting data by matching the cursor to “SET DATA", and pushing a right and left
switch at the same time. It returns to TV FORMAT before it changes automatically when it does not save the setting data
within ten seconds.
within ten seconds.
TV FORMAT returns to TV FORMAT before it changes automatically when the following operation is done.
(1) When it does not save the setting data within ten seconds.
(2) When it turns off the menu display before it saves the setting data.
(3) When it changes to “CU-FUNCTION MENU" before it saves the setting data.
(4) When it turns off the CCU power supply before is saves the setting data.
(2) When it turns off the menu display before it saves the setting data.
(3) When it changes to “CU-FUNCTION MENU" before it saves the setting data.
(4) When it turns off the CCU power supply before is saves the setting data.
■CU-FUNCTION
BUZZER :ENABLE
SDI SELECT :HD SDI
SDI PIX :HD SDI
SDI AUDIO :OFF
CCU ID : 1
TV FORMAT: 1080i
50.00Hz
TIME/DAT: ’09.01.01
12:00
BUZZER :ENABLE
SDI SELECT :HD SDI
SDI PIX :HD SDI
SDI AUDIO :OFF
CCU ID : 1
TV FORMAT: 1080i
50.00Hz
TIME/DAT: ’09.01.01
12:00
Item
Setting
Factory setting
Description
BUZZER ENABLE,
DISABLE ENABLE
Sets
buzzer operation during call input.
ENABLE :
Buzzer sounds.
DISABLE :
Buzzer does not sound.
SDI SELECT
HD SDI, SD SDI
HD SDI
Sets output signal of HD/SD-SDI OUT connector.
SDI PIX
HD SDI, SD SDI
HD SDI
Sets output signal of HD/SD-SDI OUT(PIX) connector.
SDI AUDIO
ON,OFF
OFF
Sets the embedded audio ON/OFF of the HD-SDI /SD-SDI
output.
CCU ID
1 ~ 12
1
Set the CCU ID.
This ID is required for the SETUP CONTROL UNIT to
identify the CCU when the SETUP CONTROL UNIT is
used.
TV FORMAT
Used to display the TV FORMAT submenu
TIME/DATE
Used to display the TIME/DATA submenu.
■TV FORMAT
☑1080i
□720p
☑1080i
□720p
SET DATA :PUSH +
Item
Setting
Factory setting
Description
1080i
☑
, □
☑
Select the TV FORMAT 1080i(HD-SDI IN/OUT)
☑:
☑:
SELECTED
□:
NOT SELECTED
720p
☑
, □
□
Select the TV FORMAT 720p(HD-SDI /INOUT)
SET DATA
PUSH +
- Press
the and buttons together to enable the TV
FORMAT setting.