Olympus E-P2 Benutzerhandbuch

124

EN

m

The internal temperature of the 
camera has risen due to 
continuous use, for example.

Turn off the camera and wait for the 
internal temperature to cool.

Internal camera 
temperature is too 
high.
Please wait for 
cooling before 
camera use.

Wait a moment for the camera to turn off 
automatically. Allow the internal 
temperature of the camera to cool before 
resuming operations.

BATTERY 

EMPTY

The battery is drained.

Charge the battery.

NO CONNECTION

The camera is not connected to 
the computer or printer correctly.

Disconnect the camera and connect it 
again correctly.

NO PAPER

There is no paper in the printer.

Load some paper in the printer.

NO INK

The printer has run out of ink.

Replace the ink cartridge in the printer.

JAMMED

The paper is jammed.

Remove the jammed paper.

SETTINGS
CHANGED

The printer’s paper cassette has 
been removed or the printer has 
been manipulated while making 
settings on the camera.

Do not manipulate the printer while 
making settings on the camera.

PRINT ERROR

There is a problem with the 
printer and/or camera.

Turn off camera and printer. Check the 
printer and remedy any problems before 
turning the power on again.

CANNOT PRINT

Pictures recorded on other 
cameras may not be printed on 
this camera.

Use a personal computer to print.

The lens is locked. 
Please extend the 
lens.

The lens of the retractable lens 
stays retracted.

Extend the lens.

Please check the 
status of a lens.

An abnormality has occurred 
between the camera and the 
lens.

Turn off the camera, check the connection 
with the lens, and turn the power on again.

s0026_e_00_0_unified.book  Page 124  Tuesday, September 29, 2009  10:30 AM