JVC LYT0596-001A Betriebsanweisung
EN
31
PLAYBACK
Basic Playback For Video
PL
AY
OFF
Power Switch
Rewind Button (2)
Fast-Forward Button
(3)
(3)
Play/Pause Button
(4/6)
(4/6)
Stop Button (5)
1
Load a tape (
pg. 10).
2
Set the VIDEO/DSC Switch to “VIDEO”, then set the
Power Switch to “
Power Switch to “
” while pressing down the
Lock Button located on the switch. To start playback,
press 4/6.
•To stop playback, press 5.
•Press 2 to rewind, or 3 to fast-forward the tape
press 4/6.
•To stop playback, press 5.
•Press 2 to rewind, or 3 to fast-forward the tape
during Stop mode.
To Control The Speaker Volume . . .
.... slide the Power Zoom Lever (VOL.) towards “+” to turn
up the volume, or towards “–” to turn down the volume.
NOTES:
●
If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch to
“OFF”, then to “
supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch to
“OFF”, then to “
”.
●
The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (
viewfinder or on a connected TV (
pg. 40).
●
You can also view the playback picture on the LCD
monitor with it flipped over and pushed against the
camera body.
monitor with it flipped over and pushed against the
camera body.
●
LCD monitor/viewfinder indications:
•
When power is supplied from a battery: the “
”
battery pack remaining power indicator is displayed.
When power is supplied through the DC cord: “
When power is supplied through the DC cord: “
”
does not appear.
•
During Stop mode, none of the indications are
displayed.
displayed.
●
When a cable is connected to the AV connector, the
sound is not heard from the speaker.
sound is not heard from the speaker.
Power Zoom
Lever (VOL.)
Lever (VOL.)
Speaker
Lock Button
Still Playback:
Pauses during playback.
1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.
2) To resume normal playback, press 4/6 again.
●
If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically
engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.
●
When
4
/6
is pressed, the image may not pause immediately while the camcorder stabilises the still
image.
Shuttle Search:
Allows high-speed search in either direction.
1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.
2) To resume normal playback, press 4/6.
●
During playback, press and hold
2
or
3
. The search continues as long as you hold the button.
Once you release it, normal playback resumes.
●
A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.
Frame-By-Frame Playback:
Allows frame-by-frame search.
1) Engage Still Playback.
2) Rotate MENU/BRIGHT towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse
2) Rotate MENU/BRIGHT towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse
Frame-By-Frame Playback during Still Playback.
To resume normal playback, press 4/6.
●
You can also use the provided remote control for Frame-By-Frame Playback (
pg. 50).
Playback Zoom and Playback Special Effects
Available only with the remote control (provided) (
pg. 50, 51).
VIDEO/DSC Switch (Open the
LCD monitor to access this switch)
LCD monitor to access this switch)