Ricoh K-S2 Benutzerhandbuch

Seite von 148
3
50
Shooti
n
g
4
Press 0 fully.
Movie recording starts.
In the upper left area of the monitor, “REC” blinks and the 
size of the recorded movie file is displayed.
5
Press 0 fully again.
Movie recording stops.
6
Return the main switch to the [ON] position to 
exit 
C mode.
The camera returns to shooting with the viewfinder in A 
mode.
u
 Caution
• When recording a movie with sound, the camera operation 
sounds are also recorded.
• When recording a movie with an image processing function 
such as Digital Filter applied, the movie file may be saved with 
some frames omitted.
• If the internal temperature of the camera becomes high 
during recording, the recording may be terminated.
• When a retractable lens is attached, recording stops if the 
lens is retracted during recording and an error message is 
displayed.
• When the camera enters C mode, the Wi-Fi function is 
disabled.
t
 Memo
• You can change the settings for recording a movie from the 
control panel or the C1 menu. (p.25)
• The sound level for recording a movie can be set from the 
control panel or [Recording Sound Level] of the C1 menu. 
When [Manual] is selected, [Volume] can be set from 0 to 20.
• You can record a movie continuously up to 4 GB or 25 
minutes. When the memory card is full, recording stops.
Using a Microphone
You can connect a commercially 
available stereo microphone to 
the microphone terminal on the 
camera. Using an external 
microphone can also help to 
reduce the possibility of recording 
camera operation sounds.
The following specifications are recommended for external 
microphones.
Microphone terminal
Plug
Stereo mini plug (ø3.5 mm)
Format
Stereo electret condenser
Power
Plug-in Power Method (operating voltage of 
2.0 V or lower)
Impedance 2.2 kΩ