JVC DVL520U Benutzerhandbuch

2-3

The mechanism should generally be disassembled/assem-
bled in the EJECT mode (ASSEMBLY mode). (Refer to Fig.
2-3-1.)
However, when the mechanism is removed from the main
body, it is set in the STOP mode. Therefore, after the
mechanism is removed from the main body, supply 3 V DC
to the electrode on the top of the loading motor to enter
the mechanism mode into the EJECT mode compulsory.

Fig. 2-3-1

Fig. 2-3-3

Fig. 2-3-4

Fig. 2-3-5

Fig. 2-3-6

Fig. 2-3-7

Motor

DC3V

EJECT mode

 Back side of deck

<C  IN mode>

<EJECT mode>

<STOP mode>

<SHORT FF mode>

<PLAY mode>

<REV mode>

<SUB  CAM  GEAR>

TOP  VIEW

BOTTOM  VIEW

Fig. 2-3-8

The mechanism mode of this model is classified into six
modes as shown in Table 2-3-1. Each mechanism mode
can be distinguished from others by the relative position
of “ ” mark on the sub cam gear to the inner or outer pro-
trusion on the main deck.
Refer to Fig. 2-3-2 to 2-3-8 below.
The EJECT mode, C IN mode and SHORT FF mode should
be recognized by the relative position of the “ ” mark to
the inner protrusion, while the STOP mode, REV mode and
PLAY mode should be recognized by that to the outer pro-
trusion.

Fig. 2-3-2