Ricoh G600 Benutzerhandbuch

Seite von 196
169
7
A
ppe
nd
ic
e
s
The image lacks natural 
color.
The picture was shot in conditions 
that made it difficult for auto white 
balance to adjust the white 
balance.
Add a white object to the 
composition or use a white 
balance setting other than auto.
P.87
The date or recording 
information does not 
appear on the screen.
The screen display function is set 
to no display.
Press the DISP. button to change 
the display.
P.57
The brightness of the 
picture display changes 
during AF.
You are using AF in a dark place or 
when the auto focus range and 
surrounding brightness are 
different.
This is normal.
-
There is a vertical smear 
on the image.
This is a phenomenon that occurs 
when a bright subject is shot. It is 
called the smear phenomenon.
This is normal.
-
Playback/Deleting
Problem
Cause
Solution
Refer to
Cannot play back, or the 
playback screen does 
not appear.
The camera is not in playback 
mode.
Press the 6 (Playback) button. P.49
The contents of the SD 
memory card cannot be 
played back, or the 
playback screen does 
not appear.
No SD memory card is loaded, or 
an SD memory card with no stored 
images is loaded.
Load a card with stored images. P.27
You played back an SD memory 
card that was not formatted with 
this device.
Load a card that was formatted 
and recorded with this device.
P.125
You played back an SD memory 
card that was not recorded 
normally.
Load a normally recorded card.
-
The contact surface of the SD 
memory card is dirty.
Wipe with a soft, dry cloth.
-
There is something wrong with the 
SD memory card.
Play back images from another 
card and if there is nothing wrong 
with the card, the camera is okay. 
There may be something wrong 
with the card, so do not use it.
-
The picture display 
turned off.
Battery is running low.
When using the dedicated 
rechargeable battery or AAA 
nickel-hydrogen batteries, charge 
the batteries as required. When 
using AAA alkaline batteries or 
AAA oxyride batteries, replace 
them with new batteries.
P.26
P.27
The camera was left unattended 
and unused, so auto power off 
turned it off.
Turn the camera back on.
P.29
Problem
Cause
Solution
Refer to