Ricoh 500SE Benutzerhandbuch

184

ing th

GP
S Fu

nc
tion

Check that the Bluetooth

GPS unit is turned on.

Turn the camera power on.

• The camera attempts to automatically

connect to the device and the
connection status appears. Pressing
the DISP. button cancels the
operation.

• If a passkey is required to connect to

the destination device, a message
appears prompting you to enter the
passkey. (GP.162)

• If the connection fails, an error

message appears and then the shooting screen appears. For details
about the error messages, see P.222.

• When a connection is established to a

Bluetooth

GPS unit, the Bluetooth

antenna icon, GPS information and
GPS antenna icon appear on the
shooting screen.

Disconnecting serial connection after
automatically connecting to a device ------------------------------------------------

In the Expanded Settings menu, set [BT AUTO CONN] to [OFF] (GP.183) and turn off
to disconnect serial connection. Automatic connection will not be performed when the
camera is turned on again.

Note ----------------------------------------------------------------------------------------------

To send files while connected to a Bluetooth

GPS unit, you must disconnect the serial
connection.
Select [PRINT] (GP.157) or [FILE SEND]
(GP.166, P.209) on the Playback Setting
menu to display the screen confirming whether to
disconnect the serial connection. Select [YES]
and press the MENU/OK button to disconnect the
serial connection.

Automatically Establishing a Connection