Ricoh CX6 Benutzerhandbuch

•  The display indicates that the image is being processed, and then 

the area recognized as the correction range is displayed with an 

orange frame. Up to five areas can be recognized.

•  If the target area cannot be detected, an error message appears. The 

original image remains unchanged.

•  To select another correction area, move the orange frame to the 

target area by pushing the ADJ./OK button F.

•  To cancel skew correction, push the ADJ./OK button !. Even if you 

cancel skew correction, the original image remains unchanged.

•  The display indicates that the image is being corrected, and then the 

corrected image is recorded. The original image remains unchanged.

You can also correct the skew of a previously shot still image (GP.96).

When [Skew Correct Mode] is selected, note the following:

•  To shoot the subject as large as possible, position it so that the entire portion 

of the subject is visible on the picture display.

•  The camera may fail to recognize the subject in the following cases:

-  When the image is out of focus
-  When four edges of the subject are not clearly visible
-  When it is hard to distinguish between the subject and background
-  When the background is complicated

•  Two images, one before correction and the other after correction, are 

recorded. If the number of remaining shots is less than two, you cannot shoot 
the subject.

•  The correction area may not be detected properly if the [Date Imprint] 

function is activated.