Sony DSC-RX100M3 Benutzerhandbuch

Seite von 124
GB
34
On use and care
Avoid rough handling, disassembling, modifying, physical shock, or impact such as 
hammering, dropping, or stepping on the product. Be particularly careful of the lens.
Notes on recording/playback
• Before you start recording, make a trial recording to make sure that the camera is 
working correctly.
• The camera is neither dust-proof, nor splash-proof, nor water-proof.
• Do not aim the camera at the sun or other bright light. It may cause a malfunction 
of the camera.
• If moisture condensation occurs, remove it before using the camera.
• Do not shake or strike the camera. It may cause a malfunction and you may not be 
able to record images. Furthermore, the recording media may become unusable or 
image data may be damaged.
Do not use/store the camera in the following places
• In an extremely hot, cold or humid place
In places such as in a car parked in the sun, the camera body may become 
deformed and this may cause a malfunction.
• Storing under direct sunlight or near a heater
The camera body may become discolored or deformed, and this may cause a 
malfunction.
• In a location subject to rocking vibration
• Near a location that generates strong radio waves, emits radiation or is strongly 
magnetic place. Otherwise, the camera may not properly record or play back 
images.
• In sandy or dusty places
Be careful not to let sand or dust get into the camera. This may cause the camera to 
malfunction, and in some cases this malfunction cannot be repaired.
On carrying
• Do not sit down in a chair or other place with the camera in the back pocket of 
your trousers or skirt, as this may cause malfunction or damage the camera.
ZEISS lens
The camera is equipped with a ZEISS lens which is capable of reproducing sharp 
images with excellent contrast. The lens for the camera has been produced under a 
quality assurance system certified by ZEISS in accordance with the quality 
standards of ZEISS in Germany.
Notes on the screen, electronic viewfinder and lens
• The screen and electronic viewfinder are manufactured using extremely high-
precision technology, and over 99.99% of the pixels are operational for effective 
use. However, some tiny black and/or bright dots (white, red, blue or green) may 
appear on the screen and electronic viewfinder. These dots are a normal result of 
the manufacturing process, and do not affect the recording.
• Do not hold the camera by the monitor or the viewfinder.