Philips Video Camera Benutzerhandbuch

18

19

4.   To add a stored preset as a Tour, twist the Zoom handle or press Zoom Key (Programmed preset will scroll). To remove a stored preset from the Tour, press 

the Home key, blank position mark (===) will be displayed. You can overwrite the programmed position.

5.  To place functions other than preset, press Tour, Ptrn, or Scan for Tour, Pattern or Auto Scan respectively and the use 

zoom handle or key to select No.

6.  Repeat Step 2 through 5 for each desired position. Each title will be displayed on top of the line.
7.   Up to 36 Presets, Tours, Patterns Scans can be selected for a Tour. You can expand the 

Tour sequence by calling other programmed tours. 

Push the 

Joystick handle to right or left while the cursor is on the top of the line (TOUR 01) to select another page of the Tour menu. (TOUR 01)

8.  You can enter a title for the selected Tour by twisting the 

Joystick while the cursor is on the top of the line (TOUR 01). Rotate the handle clockwise or 

      counterclockwise to scroll through the alphanumeric characters. Push the handle to the right or left to select the next or previous digit.
9.  Select Save and Exit by pushing the 

Joystick to the right. Press ESC to exit the program without saving.

Example:  Preset 001>002>003>004>005>006, Auto Scan 01 starts at preset 002, ends at preset 003, Auto Scan 02 starts at preset 005, ends at preset 

006; Tour 001,  002, A01,  004,   A02. 

 1    2    2~3   4    5~6, repeat
 where       : Quick move,   ~ : Programmed speed

(Fourth 4 Item of the Main menu / Shortcut: 

Ptrn)

The Pattern feature records user control of the selected dome camera for up to 240 seconds. Up to four 4 patterns can be stored and played back by pressing 
No.+ 

Ptrn keys subsequently.

PATTERN SETUP

NO.       TITLE                   SEC
01:  xxxxxxxxxxxxxxxx     000
02:  xxxxxxxxxxxxxxxx     041
03:  xxxxxxxxxxxxxxxx     010
04:  xxxxxxxxxxxxxxxx     020
TOTAL:                            071

SAVE AND EXIT (ESC TO CANCEL)

HOLD DOWN CTRL KEY
WHILE RECORDING.

1.  Press 

Menu key to display the main menu on the monitor.

2.  Scroll down to PATTERN and push the 

Joystick to the right. Or simply press the Ptrn key rather than use the Main Menu.

3.   Select the empty Pattern number to be programmed by pushing the 

Joystick up or down. If last column is not 000, a pattern has already been recorded. 

Patterns can be over written.

4.  Press and hold down the 

Ctrl/PGM key while controlling the camera direction and zoom with the Joystick. Your controls will be automatically recorded 

     until you release the 

Ctrl/PGM key. You can repeat this procedure until you have the pattern you want. Previously recorded patterns will be overwritten 

     each time you do this.
5.  Scroll down to the Save and Exit option and push the 

Joystick to the right to save and exit.

6.   You can title the selected Pattern by twisting the 

Joystick. Rotate the handle clockwise or counterclockwise to scroll through the alphanumeric characters, 

push the handle to right or left to select next or previous space.

7.  Pressing 

ESC will not save your information and exits to the previous mode.

7. 

Press the 

Home key at any programmed position to delete the programmed pattern.