Panasonic DMC-FX3 Benutzerhandbuch

Seite von 128
Preparation
21
VQT0Y69
[POWER SAVE]
Press [
] to display the [SETUP] menu 
and select the item to set. (P19)
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
Power save mode is activated (the 
camera is automatically turned off to 
save the battery life) if the camera 
has not been used for the time 
selected on the setting.
[OFF]: Power save mode is not activated.
• Press the shutter button halfway or turn 
the camera off and on to cancel power 
save mode.
• Power save mode is fixed to [5MIN.] in 
simple mode [
].
• Power save mode is fixed to [2MIN.] in 
economy mode.
• When using the AC adaptor (DMW-AC5; 
optional), connecting to a PC or a printer, 
recording or playing back motion pictures 
and during a slide show, power save 
mode is not activated. (However, the 
setting for power save mode is fixed to 
[10MIN.] while pausing a slide show or 
playing back a manual slide show.)
 
[ECONOMY]
Press [
] to display the [SETUP] menu 
and select the item to set. (P19)
Battery life is saved by reducing the 
brightness of the LCD monitor and turning 
it off automatically when the camera is not 
being used in recording mode. 
[LEVEL 1]: The LCD monitor turns off if the 
camera is not operated for 
about 15 seconds in recording 
mode.
[LEVEL 2]: The LCD monitor turns off if the 
camera is not operated for 
about 15 seconds in recording 
mode or for about 5 seconds 
after taking a picture.
[OFF]:
Economy mode cannot be 
activated.
• In economy mode, the LCD monitor is 
turned off while the flash is being charged.
• The status indicator lights while the LCD 
monitor is turned off. Press any button to 
turn on the LCD monitor again.
• Power save mode is fixed to [2MIN.] in 
economy mode.
[However, power save mode is not 
activated when using the AC adaptor 
(DMW-AC5; optional).]
• Economy mode will not work in simple 
mode [
], when using the AC adaptor 
(DMW-AC5; optional), recording motion 
pictures, the menu screen is displayed or 
the self-timer is set.
• The brightness of the LCD monitor is not 
reduced in Power LCD mode and high 
angle mode.
[BEEP]
Press [
] to display the [SETUP] menu 
and select the item to set. (P19)
[BEEP LEVEL]
[
]: No operation sound
[
]: Soft operation sound
[
]: Loud operation sound
[BEEP TONE]:
/
/
• The [BEEP] setting also affects simple 
mode [
].
[SHUTTER]
Press [
] to display the [SETUP] menu 
and select the item to set. (P19)
Set to select the volume of shutter sound.
[SHUTTER VOL.]
[
]: No shutter sound
[
]: Soft shutter sound
[
]: Loud shutter sound
[SHUTTER TONE]:
/
/
• The [SHUTTER] setting also affects 
simple mode [
].
[VOLUME]
Press [
] to display the [SETUP] menu 
and select the item to set. (P19)
The volume of speakers can be adjusted in 
7 steps from level 6 to 0.
• When you connect the camera to a TV, the 
volume of the TV speakers does not change.
/SET
MENU
/SET
MENU
/SET
MENU
1
2
3
/SET
MENU
1
2
3
/SET
MENU
VQT0Y69ENG.book  21 ページ  2006年6月30日 金曜日 午前11時7分