Panasonic VQT2Q86 Benutzerhandbuch
Before Use
- 12 -
1
With the card/battery door and terminal
cover closed, rinse with water, or if it
was used in the sea, soak the unit in
fresh water in a shallow container of for
10 minutes or less.
•
cover closed, rinse with water, or if it
was used in the sea, soak the unit in
fresh water in a shallow container of for
10 minutes or less.
•
If you have attached the silicon jacket, be
sure to rinse the camera after removing it.
sure to rinse the camera after removing it.
•
Leaving the camera with foreign objects or
saline matter on it may cause damage,
discoloration, corrosion, unusual odour, or
deterioration.
saline matter on it may cause damage,
discoloration, corrosion, unusual odour, or
deterioration.
2
Wipe off the water, and dry the camera
by standing it on a dry cloth in a well
ventilated shaded area.
by standing it on a dry cloth in a well
ventilated shaded area.
3
Confirm there is no water on the
camera, and open the card/battery door
and terminal cover.
camera, and open the card/battery door
and terminal cover.
4
Wipe off any water or sand inside the
card/battery door and terminal cover
with a soft dry cloth.
card/battery door and terminal cover
with a soft dry cloth.
Caring for the camera after using it underwater