Panasonic DMC-ZS1K Benutzerhandbuch
10
VQT1Z82
VQT1Z82
11
Before use
Standard
Accessories
Do a test shot first!
Check first to see if you can take pictures
and record sounds (motion pictures/
pictures with audio) successfully.
pictures with audio) successfully.
We will not compensate for failed/
lost recording or for direct/indirect
damage.
Panasonic will not provide compensation
for video or image damage caused by
faults with camera or card.
faults with camera or card.
Certain pictures cannot be played
back
•
Pictures edited on a computer
•
Pictures taken or edited on a different
camera
camera
(Pictures taken or edited on this camera
may also not be able to be played back
on other cameras)
on other cameras)
Software on the CD-ROM supplied
The following actions are prohibited:
•
•
Making duplicates (copying) for sale or
rent
rent
•
Copying onto networks
Avoid shocks, vibration, and pressure
•
Avoid exposing the camera to strong
vibration or shock; e.g. dropping or hitting
the camera, or sitting down with the camera
in your pocket. (Attach hand strap to avoid
dropping camera. Hanging any items other
than the supplied hand strap from the
camera can apply pressure against it.)
vibration or shock; e.g. dropping or hitting
the camera, or sitting down with the camera
in your pocket. (Attach hand strap to avoid
dropping camera. Hanging any items other
than the supplied hand strap from the
camera can apply pressure against it.)
•
Do not press the lens or the LCD monitor.
Do not get the camera wet or insert
foreign objects
This camera is not waterproof.
•
Do not expose the camera to water, rain,
or seawater.
or seawater.
(If camera gets wet, wipe with a soft,
dry cloth. Wring cloth thoroughly first if
wet with seawater, etc.)
wet with seawater, etc.)
•
Avoid exposing lens and socket to dust
or sand, and do not allow liquids to leak
into gaps around buttons.
or sand, and do not allow liquids to leak
into gaps around buttons.
Avoid condensation caused by sudden
changes in temperature and humidity
•
When moving between places of
different temperature or humidity, place
camera into a plastic bag and allow to
adjust to conditions before use.
different temperature or humidity, place
camera into a plastic bag and allow to
adjust to conditions before use.
•
If the lens clouds up, switch off the
power and leave for about two hours to
allow camera to adjust to conditions.
power and leave for about two hours to
allow camera to adjust to conditions.
•
If the LCD monitor clouds up, wipe with
a soft, dry cloth.
a soft, dry cloth.
Read first
Lens
•
If lens is dirty:
Images may appear slightly white if lens is
dirty (fingerprints, etc.).
Turn the power on, hold the extracted lens
barrel with your fingers, and gently wipe
the lens surface with a soft, dry cloth.
Images may appear slightly white if lens is
dirty (fingerprints, etc.).
Turn the power on, hold the extracted lens
barrel with your fingers, and gently wipe
the lens surface with a soft, dry cloth.
•
Do not leave in direct sunlight.
Camera ON/OFF switch
Do not touch the lens
barrier, as this may
damage lens. Be
careful when removing
camera from bag, etc.
When using tripod
•
Do not apply excessive force or tighten
screws at an angle (may damage
camera, screw hole, or label.)
screws at an angle (may damage
camera, screw hole, or label.)
•
Ensure that the tripod is stable.
(Read the tripod’s instruction manual.)
(Read the tripod’s instruction manual.)
When transporting
Switch off power.
We recommend using a genuine leather
We recommend using a genuine leather
case (DMW-CT3, sold separately).
Please also refer to ‘Usage cautions and
notes’ (P.122).
notes’ (P.122).
LCD monitor characteristics
Extremely high precision technology is employed to produce the LCD monitor screen.
However there may be some dark or bright spots (red, blue or green) on the screen.
However there may be some dark or bright spots (red, blue or green) on the screen.
This is not a malfunction.
The LCD monitor screen has more than 99.99% effective pixels with
a mere 0.01% of the pixels inactive or always lit. The spots will not be
recorded on pictures on the built-in memory or a card.
The LCD monitor screen has more than 99.99% effective pixels with
a mere 0.01% of the pixels inactive or always lit. The spots will not be
recorded on pictures on the built-in memory or a card.
Grip area
Unit temperature
The camera may become warm during use. (Especially grip area, etc.)
This does not cause a problem with the performance or quality of the
camera.
This does not cause a problem with the performance or quality of the
camera.
To prevent damage, malfunctions,
and faults
Part numbers are as of February 2009
Battery Pack
DMW-BCG10PP
• Charge the battery
• Charge the battery
before use.
(referred to in this manual as ‘battery’)
Battery Charger
DE-A65B
(referred to in this manual as ‘charger’)
Battery Carrying
Case
VGQ0E45
VGQ0E45
Hand Strap
VFC4297
USB Connection
Cable
K1HA14AD0001
K1HA14AD0001
AV Cable
K1HA14CD0001
CD-ROM
• Install software on
your computer to
use it.
use it.
Please dispose of all packaging
appropriately.
Optional accessories (P.132)
•
Cards are optional. You can record
or play back pictures on the built-in
memory when you are not using a card.
(P.16)
or play back pictures on the built-in
memory when you are not using a card.
(P.16)
•
If any accessories are lost, customers
in the USA and Puerto Rico should
contact Panasonic’s parts department
at 1 800 833-9626 and customers
in Canada should contact 1 800
99-LUMIX (1-800-995-8649) for
further information about obtaining
replacement parts.
in the USA and Puerto Rico should
contact Panasonic’s parts department
at 1 800 833-9626 and customers
in Canada should contact 1 800
99-LUMIX (1-800-995-8649) for
further information about obtaining
replacement parts.