Panasonic DMC-FX9GN Benutzerhandbuch

Connecting to a PC or Printer

93

VQT0S74

You can load pictures recorded with the 
camera to a PC by connecting the camera 
and PC.
The software [LUMIX Simple Viewer] 
(for Windows

®

) in the CD-ROM (supplied) 

allows you to load pictures recorded with 
the camera to a PC, print, or send them by 
e-mail easily.
If you use Windows

 

USB driver and then connect it to the 
computer.
For details of [LUMIX Simple Viewer] and 
installation, refer to the separate operating 
instructions for PC connection.

A: USB connection cable (supplied)
B: AC adaptor (DMW-AC5; optional)
• Turn off the camera before inserting or 

removing the cable for the AC adaptor 
(DMW-AC5; optional).

• If you set [USB MODE] to [PictBridge 

(PTP)] and then connect the camera to 
the PC, messages may appear on the 
screen of the PC.
Select [Cancel] to close the indications 
and disconnect the camera from the 
PC. Connect the camera after you set 
[USB MODE] again.

A 

• Connect the USB connection cable with 

the [

] mark facing the [

2] mark on 

the [DIGITAL] socket.

• Hold the USB connection cable at 

C 

and insert straight in and take straight 
out. (Forcibly inserting at a slant or 
upside down can deform the pins, and 
this can damage the camera or other 
connected equipment.)

D: This message appears during data 

transfer.

[Windows]
The drive appears on the [My Computer] 
folder.
• If it is the first time you are connecting the 

camera to a PC, the required driver is 
installed automatically so that the camera 
can be recognised by the Windows Plug 
and Play, then it appears on the 
[My Computer] folder.

[Macintosh]
The drive is displayed on the screen as 
[NO_NAME] or [Untitled].

ACCESS