Nikon D800BODY Betriebsanweisung

107

k

Press the shutter-release 
button all the way down to 
start the timer. The self-timer 
lamp will start to blink.  Two seconds before the photograph is 
taken, the self-timer lamp will stop blinking. The shutter will 
be released about ten seconds after the timer starts.

To turn the self-timer off before a photograph is taken, turn the 
release mode dial to another setting.

A

A

Time (bulb) exposures can not be recorded using the self-timer. A fixed 
shutter speed will be used if a speed of A is selected in exposure 
mode h.

A

Before taking a photograph with the flash, press the flash pop-up 
button to raise the flash and wait for the M indicator to be displayed in 
the viewfinder (0 181). Shooting will be interrupted if the flash is raised 
after the self-timer has started. Note that only one photograph will be 
taken when the flash fires, regardless of the number of exposures 
selected for Custom Setting c3 (Self-timer; 0 291).

A

For information on choosing the duration of the self-timer, the number 
of shots taken, and the interval between shots, see Custom Setting c3 
(Self-timer, 0 291).

 

For information on setting a beep to sound during 

the timer count-down, see Custom Setting d1 (Beep, 0 292).