Nikon D60BODY Benutzerhandbuch

Charging and Inserting the Battery

First S

teps

1.4 Charging is complete when the CHARGE lamp stops blinking. 

Remove the battery from the charger and unplug the charger. 

Insert the battery.

2.1 After confirming that the power switch is in 

the off position, open the battery chamber 
cover. 

2.2 Insert a fully charged battery as shown at 

right. Close the battery chamber cover. 

s

B

Turn the camera off and confirm that the memory card access lamp is off before removing the 
battery.

B

• Read and follow the warnings and cautions on pages ii–iii and 164–166 of this manual, together with 

• Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F). During 

charging, the temperature should be in the vicinity of 5–35 °C (41–95 °F). For best results, charge 
the battery at temperatures above 20 °C (68 °F). Battery capacity may drop if the battery is charged 
or used at lower temperatures. 

• The battery may be hot immediately after use. If so, wait for the battery to cool down before 

charging.

• Replace the supplied terminal cover after removing the battery from the camera or the quick 

charger to avoid shorting the battery.

• Unplug the quick charger when it is not in use.

CHARGE lamp

1

2

Be sure that the 
battery contacts are 
facing down.