Nikon COOLPIXSAW120BLUE Benutzerhandbuch

E

Re
feren

c

e

 S

ect
io

n

Turn off the camera.

Turn on the printer.

• Check printer settings.

Connect the camera to the printer using the USB cable.

• Make sure that the plugs are properly oriented. Do not insert or remove the 

plugs at an angle when connecting or disconnecting them.

The camera is automatically turned on.

• The PictBridge startup screen (1) is displayed in the camera monitor, 

followed by the Print selection screen (

2).

B

When Auto is selected for Charge by computer (

E75), it may be impossible to 

print images with direct connection of the camera to some printers. If the PictBridge 
startup screen is not displayed after the camera is turned on, turn the camera off and 
disconnect the USB cable. Set Charge by computer to Off and reconnect the 
camera to the printer.

32

15/05/2014  No.  32

Print selection

1

2