Nikon COOLPIXS9700BK Benutzerhandbuch

E

Re
feren

ce

 S

ect
io

n

Select Save log, and press the 

k 

button.

• The log data is saved to a memory card.

B

• If the date and time are not set, the log cannot be recorded.
• Use a fully charged battery to prevent the camera from turning off during log 

recording. When the battery power becomes exhausted, log recording ends.

• Even when the camera is turned off, log recording is continuously performed until 

the preset time has elapsed if there is still time remaining for log recording.

• Log recording ends due to the operations below even when there is time 

remaining for log recording.

- The battery is removed
- Record location data in Location data options is set to Off when the 

location log is recorded

- Reset all in the setup menu is performed
- The setting of the internal clock (time zone or date and time) is changed
- End log is selected in Create log (

E83) of the Location data options menu

• Log recording is paused during the operations below. 

- During continuous shooting
- During movie recording
- When connected with a USB cable or HDMI cable

Log recording is resumed when the above operations are finished. However, to 
resume log recording after using the charging AC adapter, you must turn on the 
camera after disconnecting the USB cable from it.

• The log data is temporarily stored in the camera. New logs cannot be recorded if 

the log data remains in the camera. After recording log data, save it to a memory 
card.

• See “Log Data Saved on Memory Cards” (E96) for more information.

C

• To erase the log data that is temporarily stored in the camera, select Erase log in 

step 4.

• To erase the log data that is stored on the memory card, press the l button in 

View log (

End log

Erase log

Save log