Nikon 1522B Benutzerhandbuch

16

A

When using autofocus with a lens equipped with an A-M 
mode switch, slide the switch to A (if the lens has an M/A-M or 
A/M-M

 switch, select M/A or A/M). For information on other 

lenses that can be used with this camera, see page 63.

If the lens has a vibration reduction (VR) switch, select ON to 
reduce the effects of vibration.

A

Use the zoom ring to zoom in on the subject so that it fills a 
larger area of the frame, or zoom out to increase the area 
visible in the final photograph (select longer focal lengths on 
the lens focal length scale to zoom in, shorter focal lengths to 
zoom out).

A

Be sure the camera is off when removing or exchanging 
lenses. To remove the lens, press and hold the lens release 
button (q) while turning the lens clockwise (w). After 
removing the lens, replace the lens caps and camera body 
cap.

A

The camera clock is less accurate than most watches and household clocks.

 

Check the clock 

regularly against more accurate time pieces and reset as necessary.

A

The camera clock is powered by an independent, rechargeable power source, which is 
charged as necessary when the main battery is installed.

 

Three days of charging will power 

the clock for about a month.

 

If a message warning that the clock is not set is displayed when 

the camera is turned on, the clock battery is exhausted and the clock has been reset.

 

Set the 

clock to the correct time and date.