Konica Minolta G600 Benutzerhandbuch
15
Inserting a battery
This digital camera uses one NP-600 lithium-ion
battery. Before using the battery, read the safety
warnings on pages 3 and 4 of this manual. When
replacing the battery, the camera should be
turned off.
battery. Before using the battery, read the safety
warnings on pages 3 and 4 of this manual. When
replacing the battery, the camera should be
turned off.
Slide the battery-chamber door toward the side
of the camera to release the safety catch (1).
Open the door.
of the camera to release the safety catch (1).
Open the door.
Insert the battery (2).
Close the battery-chamber door (3) and slide it
toward the camera to engage the safety catch.
toward the camera to engage the safety catch.
After initially installing the battery, the menu lan-
guage, clock, and calendar need to be set. The
camera can also reset if the camera is stored
without a battery. See page 21 on how to set up
the camera.
guage, clock, and calendar need to be set. The
camera can also reset if the camera is stored
without a battery. See page 21 on how to set up
the camera.
After initially inserting a charged battery, do not remove it from the camera for three hours; the
camera can be off during this period. The lithium-ion battery is used to charge an internal bat-
tery, which protects settings when the camera is turned off.
camera can be off during this period. The lithium-ion battery is used to charge an internal bat-
tery, which protects settings when the camera is turned off.
Camera notes
1
2
3