Konica Minolta G600 Benutzerhandbuch
18
GETTING UP AND RUNNING
Installing and removing a memory card
Always turn off the camera and confirm
the indicator lamps are out before chang-
ing the memory card, otherwise the card
may be damaged, and data lost.
the indicator lamps are out before chang-
ing the memory card, otherwise the card
may be damaged, and data lost.
An SD Memory card, MultiMediaCard, or
Memory Stick must be inserted for the camera
to operate. If a card has not been inserted, a no-
card warning appears on the LCD monitor.
Memory Stick must be inserted for the camera
to operate. If a card has not been inserted, a no-
card warning appears on the LCD monitor.
Slide the battery-chamber door toward the side
of the camera to release the safety catch (1).
Open the door.
of the camera to release the safety catch (1).
Open the door.
Insert the memory card all the way into the card
slot and then release (2). The Memory Stick slot
is next to the battery; the SD Memory Card /
MultiMediaCard slot is next to the back of the
camera. The card should catch in the slot.
Always push the card in straight, never at
an angle. Never force the card. If the card
does not fit, check that it is oriented cor-
rectly.
slot and then release (2). The Memory Stick slot
is next to the battery; the SD Memory Card /
MultiMediaCard slot is next to the back of the
camera. The card should catch in the slot.
Always push the card in straight, never at
an angle. Never force the card. If the card
does not fit, check that it is oriented cor-
rectly.
To eject a memory card, press the card into the
slot and release (3). The card can then be pulled
out.
slot and release (3). The card can then be pulled
out.
Close the battery-chamber door and slide it
toward the camera to engage the safety catch
(4).
toward the camera to engage the safety catch
(4).
1
2
3
4