Canon PowerShot S40 Benutzerhandbuch

108   

Print Settings (DPOF Print Settings)

Select images for printing.

Single Images
• When the print type (p. 99) is set to [Standard] or

[Both], select an image using B or A on the
multicontroller. You can set the number of copies
(up to 99) to be printed using C or D on the
multicontroller.

• When the print type (p. 99) is set to [Index], select an

image using B or A on the multicontroller and
mark or remove marks from images using C or D
on the multicontroller.

• You can use the same procedures to select images in

index replay (3 images). Press the 

 button to

switch between single replay and index replay.

All the Images on a CF Card
• Press the 

 button to switch to index replay (three

images).

• You can set one copy of each image to print by

pressing 

, then selecting [Mark All] using C or

D

 on the multicontroller, and pressing 

 again.

• When the print type is set to [Standard] or [Both],

the setting for the number of print copies can be
changed for each image. When [Index] is selected,
the print settings can be deleted. For the instructions
on changing settings, please reread Step 3 from the
beginning.

• You can cancel all the settings by selecting [Clear all].

Press the 

 button.

• The selection mode will turn off and the Print Order menu will reappear.

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

○

• Images are printed in order from oldest to newest by the shooting date.
• A maximum of 998 images can be marked per CF card.
• When [Print Type] is set to [Both], the number of copies can be set. When it is set

to [Index], the number of copies cannot be set (only one copy will be printed).

• Print settings can also be assigned to images with the supplied software programs

on a computer.

Number of Copies