Canon SD800 IS Benutzerhandbuch
V
iewing
iewing
Imag
es on
a TV se
t
103
Viewing Images on a TV set
You can shoot or play back images on a television with the supplied
AV cable.
AV cable.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards (p. 27). The default
setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
accommodate different regional standards (p. 27). The default
setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others
If the video system is set incorrectly, the camera output may
not display properly.
1
Turn off the Camera and the TV.
2
Connect the AV cable to the camera’s A/V
OUT terminal.
OUT terminal.
zSlip a fingernail under the top edge
of the camera's DIGITAL terminal
cover, lift up and plug the AV cable
in all the way.
cover, lift up and plug the AV cable
in all the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to video mode.
5
Turn on the camera.
VIDEO
AUDIO
Yellow
Black