Canon Optura 600 Benutzerhandbuch
132
NO INK
The ink cartridge is not inserted or is out of ink.
LOW INK LEVEL
The ink cartridge needs to be replaced soon. Select [CONTINUE] to
restart printing.
restart printing.
INK CASSETTE ERROR
There is a problem with the ink cassette.
PAPER AND INK DO
NOT MATCH
NOT MATCH
The ink cannot be used with the selected paper type.
WASTE TANK FULL
Waste tank is full. Select [CONTINUE] to restart printing. Consult your
dealer or a Canon Service Center listed in the Contact List provided with
the printer or the printer manual to replace the waste tank (waste ink
absorber).
dealer or a Canon Service Center listed in the Contact List provided with
the printer or the printer manual to replace the waste tank (waste ink
absorber).
FILE ERROR
You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.
camcorder, with a different compression, or was edited on a computer.
CANNOT PRINT!
You attempted to print an image that was recorded with another
camcorder, with a different compression, or was edited on a computer.
camcorder, with a different compression, or was edited on a computer.
COULD NOT PRINT X
IMAGES
IMAGES
You attempted to use the print order settings to print X images that were
recorded with another camcorder, with a different compression or were
edited on a computer.
recorded with another camcorder, with a different compression or were
edited on a computer.
SET
PRINT ORDER
No still images on the memory card have been marked with a
print
order.
CANNOT TRIM
You attempted to trim an image that was recorded with another
camcorder.
camcorder.
READJUST TRIMMING
You changed the print style after you set the trimming settings.
PRINTER ERROR
Cancel printing. Turn off the printer and turn it back on. Check the printer
status.
status.
PRINT ERROR
Cancel printing, disconnect the USB cable and turn off the printer. After a
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
When you are printing using the
while, turn the printer back on and reconnect the USB cable. Check the
printer status.
When you are printing using the
button, check the print settings.
HARDWARE ERROR
Cancel printing. Turn off the printer and turn it back on. Check the printer
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on.
status. If the printer is equipped with a battery, it might be exhausted. In
such case, turn off the printer, replace the battery and turn it back on.
RECHARGE THE
PRINTER BATTERY
PRINTER BATTERY
The printer battery is depleted.
COMMUNICATION
ERROR
ERROR
The printer is experiencing a data transmission error. Cancel printing,
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing
using the
disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. When you are printing
using the
button, check the print settings.
Or, you attempted to print from a memory card that contains a large
number of images. Reduce the number of images.
number of images. Reduce the number of images.
CHECK PRINT
SETTINGS
SETTINGS
The print setting cannot be used for printing with the
button.
PRINTER IN USE
The printer is in use. Check the printer status.
PRINTER WARMING UP
Printer is warming up. If the message does not disappear after a few
seconds, check the printer status.
seconds, check the printer status.
PAPER LEVER ERROR
Paper lever error occurred. Adjust the paper selection lever to the proper
position.
position.
PRINTER COVER OPEN
Close the printer cover securely.
NO PRINTHEAD
No print head is installed in the printer or print head is defect.
Message
Explanation