Canon EOS REBEL XS Benutzerhandbuch

56

To obtain a good exposure of the subject, the camera sets the exposure 
(shutter speed and aperture) automatically. This is called Program AE.

d

 

Press the shutter button halfway and 
the camera will focus.

X

The exposure setting (shutter speed 
and aperture) set automatically is 
displayed in the viewfinder.

 

Press the shutter button completely.

 

Changing the ISO speed and using the built-in flash.
To match the subject and lighting level, you can change the ISO 
speed (p.57) or use the built-in flash (p.58). In the <d> mode, the 
built-in flash will not fire automatically. So under low light, press the 
<I> (Flash) button to pop-up the flash.

 

The program can be shifted. (Program shift)
After pressing the shutter button halfway, turn the <6> dial to 
change the shutter speed and aperture setting combination 
(program). After you take the picture, the program shift will be 
canceled. Program shift is not possible with flash.

d

In very low light or very bright light, the shutter speed and 
aperture display will blink when you press the shutter 
button halfway, as shown in the figure. In low light (30" 
3.5), either increase the ISO speed (p.57) or use flash 
(p.58). In bright light (4000 22), decrease the ISO speed.

COP

Y