Canon 9128B016 Benutzerhandbuch
510
If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
error message will appear. Follow the on-
screen instructions.
* If the error still persists, write down the error number and contact your nearest
Canon Service Center.
Error Codes
Number
Error Message and Solution
01
Communications between the camera and lens is faulty. Clean the
lens contacts.
lens contacts.
Î
Clean the electrical contacts on the camera and lens, use a Canon
lens, or remove and install the battery pack again (p.21, 22, 40).
lens, or remove and install the battery pack again (p.21, 22, 40).
02
Card* cannot be accessed. Reinsert/change card* or format card*
with camera.
with camera.
Î
04
Cannot save images because card* is full. Replace card*.
Î
05
The built-in flash could not be raised. Turn the camera off and on again.
Î
Operate the power switch (p.45).
06
Sensor cleaning could not be performed. Turn the camera off and
on again.
on again.
Î
Operate the power switch (p.45).
10, 20
30, 40
50, 60
70, 80
99
30, 40
50, 60
70, 80
99
An error prevented shooting. Turn the camera off and on again or
re-install the battery.
re-install the battery.
Î
Operate the power switch, remove and install the battery pack
again, or use a Canon lens (p.40, 45).
again, or use a Canon lens (p.40, 45).
Error number
Cause and countermeasures