Canon 4342B001 Benutzerhandbuch

111

In 

D mode, you can choose 3 levels of flash output.

D.

●

After pressing the 

r button, immediately 

turn the 

÷ dial to choose the level of 

output, then press the 

m button.

X

Once set, 

~ will appear on the screen.

When the camera detects the possibility that people have their eyes shut, 

 

appears.

●

Press the 

n button, then choose 

[Blink Detection] in the 

4 tab. Press the 

qr buttons to choose [On].

X

When a person with shut eyes is detected, 
a frame and 

 appear.

Adjusting the Flash Output

You can also set the flash output with the following methods. However, it 
cannot be set with the 

r button when an external flash (sold separately) is 

attached. In this case, set the flash output using methods with an asterisk *.

•

After pressing the 

m button, press the op buttons to choose ~, then press 

the 

qr buttons or turn the Ê dial. * 

•

Press the 

n button and choose [Flash Control] from the 4 tab. Then 

choose [Flash Output] and press the 

qr buttons.*

•

Press the 

r button, then the n button, or press and hold the r button 

for more than 1 second, and the setting screen will appear. Choose [Flash 
Output], then press the 

qr buttons.

Checking for Shut Eyes

COP

Y