Canon 8409B001 Benutzerhandbuch

105

z

z

Double-click the connected camera icon.

z

z

Driver installation will begin.

z

z

After driver installation is complete, and 

the camera and computer connection 

is enabled, the AutoPlay screen will be 

displayed. Nothing will be displayed on 

the camera screen.

z

z

The screen displayed when the devices 

are connected varies depending on the 

target device.

z

z

When the camera is connected to a 

smartphone or Web service, an image 

transfer screen is displayed.

z

z

For instructions on sending images, see 

z

z

When the camera is connected to a 

computer, the camera screen is blank. 

the computer.

z

z

When the camera is connected to a 

printer, you can print by following the 

same steps as for printing via USB. For 

If you chose [PIN Method] in step 7, a PIN code will be displayed on the 

screen. Be sure to set this code in the access point. Choose a device in the 

[Select a Device] screen. For further details, refer to the user manual included 

with your access point.

To add multiple destinations, repeat this procedure from the first step.

You can reconnect to any previous access points automatically by following 

step 4 in “Connecting to WPS-Compatible Access Points” (

).

To reconnect to the access point, confirm that the target device is already 

connected to it, and then follow the procedure from step 9. Note that this 

step is not required when connecting to Web services.

To switch access points, choose [Switch Network] on the screen 

displayed when you establish a connection, and then follow the 

procedure from step 6.

z

z

View the listed networks (access 

points) as described in steps 1 – 5 of 

“Connecting to WPS-Compatible Access 

).

z

z

Press the <

o><p> buttons or turn the 

<

5> dial to choose a network (access 

point), and then press the <

m> button.