Canon 8230B001 Benutzerhandbuch

119

If you think there is a problem with the camera, first check the following.

If the items below do not solve your problem, contact a Canon Customer 

Support Help Desk.

Confirm that the battery is charged (

  11,  113).

Confirm that the battery is inserted facing the correct way (

Confirm that the memory card cover and battery cover are fully closed (

  11,  13).

Dirty battery terminals reduce battery performance. Try cleaning the terminals with a 

cotton swab and reinserting the battery a few times.

Battery performance decreases at low temperatures. Try warming the battery a little 

by putting it in your pocket, for example, ensuring that the terminals do not touch any 

metal objects.

If these measures do not help and the battery is still depleted soon after charging, it 

has reached the end of its life. Purchase a new battery.

Do not open the memory card cover or battery cover while the camera is on. Close 

the cover, turn the camera on, and then turn it off again (

  11,  13).

Battery swelling is normal and does not pose any safety concerns. However, if battery 

swelling prevents the battery from fitting in the camera, contact a Canon Customer

Support Help Desk.

Switch from Playback mode (

  15) to Shooting mode, if necessary, by pressing 

the <

1> button. 

Note that the following display problems are not recorded in still images but are 

recorded in movies.

The screen may darken under bright light.

The screen may flicker under fluorescent or LED lighting.

Purplish banding may appear on the screen if you compose a shot that includes a 

bright light source.

Although date stamps cannot be added to images with this camera, images can be 

printed with the date as follows.

  Use the included software to print

For details, refer to the Software Guide (

  Print using printer functions

Set [IS Mode] to [Continuous] (

Set the flash mode to [

h] (

Mount the camera on a tripod or take other measures to keep it still. In this case, you 

should set [IS Mode] to [Off] (

Press the shutter ring halfway to focus on subjects before pressing it all the way down 

Make sure subjects are within focusing range (

Set [AF-assist Beam] to [On] (

Blurring may occur more often when Touch Shutter is used to shoot, depending on 

shooting conditions. Hold the camera still when shooting.

To have AF frames displayed and the camera focus correctly, try composing the shot 

with higher-contrast subject areas centered before you press the shutter ring halfway. 

Otherwise, try pressing the shutter ring halfway repeatedly.

COP

Y