Casio QV-R40 Benutzerhandbuch
95
PLAYBACK
Cropping an Image
Use the following procedure when you want to crop a
portion of an enlarged image and use the remaining part of
the image as an e-mail attachment, Web page image, etc.
portion of an enlarged image and use the remaining part of
the image as an e-mail attachment, Web page image, etc.
1.
In the PLAY mode, use [
] and [
] to scroll
through images and display the one you want
to crop.
to crop.
2.
Press [MENU].
3.
Select the “PLAY”
tab, select
“Trimming”, and then
press [
tab, select
“Trimming”, and then
press [
].
• This causes a cropping
boundary to appear.
4.
Use the zoom controller to make the cropping
boundary larger or smaller.
boundary larger or smaller.
• The size of the cropping boundary depends on the
size of the image on the display.
5.
Use [
], [
], [
], and [
] to move the
cropping boundary up, down, left, or right
until the area of the image you want to extract
is within the boundary.
until the area of the image you want to extract
is within the boundary.
6.
Press [SET] to extract the part of the image
enclosed in the cropping boundary.
enclosed in the cropping boundary.
• If you want to cancel the procedure at any point,
press [MENU].
IMPORTANT!
• Cropping an image creates a new file that contains
the cropped image. The file with the original image
also remains in memory.
also remains in memory.
• A Movie mode image cannot be cropped.
• An image recorded using another camera model
• An image recorded using another camera model
cannot be cropped.
• If the message “This function is not supported for this
file.” appears, it means that the current image cannot
be cropped.
be cropped.
• The cropping operation cannot be performed if there
is not enough memory to store the cropped image.