Casio EX Z 2 Benutzerhandbuch
35
Snapshot Tutorial
1.
In the REC mode, press [2] (
)
once.
2.
Use [4] and [6] to select the flash
setting you want and then press
[SET].
setting you want and then press
[SET].
When the “R Panel” menu item (page
107) is “Off” (so the Control Panel is
not displayed), pressing [2] (
107) is “Off” (so the Control Panel is
not displayed), pressing [2] (
) will
cycle through the available flash settings.
3.
Press the shutter button to shoot.
• For information about Flash Range, see page 145.
Using Flash (Flash)
Auto Flash
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
(amount of light and brightness) conditions.
Flash Off
Flash does not fire.
Flash On
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Red Eye
Reduction
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
reduce the chance of redness in the subject’s eyes.
[2] (
)
Flash
>
?
<
¥
N
2
Back lamp
Flashes orange while the flash is charging to
indicate that image recording is disabled.
Flashes orange while the flash is charging to
indicate that image recording is disabled.
• You will not be able to take another flash
snapshot until the lamp stops flashing orange,
which indicates that charging is complete.
which indicates that charging is complete.
<
indicates the flash will fire.