Casio EX-FC300S Benutzerhandbuch

49

Snapshot Tutorial

Watching the image on the monitor screen use 
[4] (nearer) and [6] (further) to adjust focus.

• At this time the image that is within the boundary 

will enlarge and fill the monitor screen, which aids 
in focusing. If you do not perform any operation for 
two seconds while the enlarged image is displayed, 
the screen in step 1 will re-appear.

• When the function ring (page 44) or “Control Dial” (page 100) is set to “MF” 

(Manual Focus), you can use the function ring or control dial for focusing.

• An Auto Macro feature detects how far the subject is from the lens and 

automatically selects either Macro Focus or Auto Focus accordingly.

• Use of the flash together with Macro Focus can cause the light of the flash to 

become blocked, which may result in unwanted lens shadows in your image.

• In the case of movie recording, Auto Macro operates before you start recording. 

After recording is started, however, focus is fixed.

• Whenever you perform an optical zoom operation while shooting with Auto Focus, 

Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell 
you the focus range, as shown below. Note that the focus range is displayed 
including the Auto Macro range only when shooting with Auto Focus.
Example: oo

*

 cm to 9

*

oo

 is the actual focusing range value.

• The operations assigned to the [4] and [6] keys with the “L/R Key” setting (page 

101) are disabled while Manual Focus is selected as the focus mode.

• The “Focus” setting is always fixed at “AF” (Auto Focus) whenever “Face 

Detection” is being used. If you want to change the “Focus” setting, first select “Off” 
for “Face Detection”.

Yellow boundary