Barco matrixpro-II 12x8 Benutzerhandbuch

 MatrixPRO- II 

 

 

 

 

 

 

 

 

 

          21

The MatrixPRO-II is initially setup from the front panel LCD screen on the rack.  To enter the setup 
pages, press the UP and DOWN buttons simultaneously.  The front panel will display the main setup 
menu page:

MAIN SETUPS

INPUT SETUP

>

OUTPUT SETUP

SYSTEM SETUP

PRESET SETUP

RESET MATRIX

A ">" cursor is used to point to a menu option. The ">" cursor is moved up and down using the UP 
and DOWN arrow buttons to the right of the LCD screen.  Pressing the SELECT button causes the 
front panel to enter the menu or sub-menu page that is next to the cursor.  The ">" will change to a 
"*" to indicate that the selected menu option is selected and ready to be adjusted. The up and down 
arrow buttons are then used to make the actual setting adjustment.  When satisfi ed with the setting, 
pressing the select button will save the selection.  Pressing ESCAPE a second time will return to the 
main operating page.

NOTE: The LCD display will automatically return to the main operating page after 45 seconds of 
inactivity.

Pressing the up and down buttons to position the ">" cursor next to INPUT SETUP then pressing the 
SELECT button will display the input setup menu pages.  The INPUT SETUP page will default to 
Input 01.  

INPUT SETUP

INPUT NUMBER

>

AUDIO TYPE

INPUT TRIM

VIDEO TYPE

CABLE LENGTH

01

CON

-5 dB

NATIVE

0

SAVE

This function is used to select which input to setup.  At the “>“ prompt either press an input button to 
select that input or change the input number by positioning the cursor to INPUT NUMBER Press the