Barco matrixpro-II 12x8 Benutzerhandbuch

32 

          MatrixPRO- 

II

 
The main purpose of the matrix is to connect inputs to outputs; the front panel is one method of 
accomplishing this.  The main screen is used and will look something like this:

Main operating page  with audio option 

PRESET VOL

MATRIXPRO-II

BARCO

Pressing the VIDEO button for connecting video, the AUD button for switching audio, both VIDEO 
and AUD to switch both. Pressing the VOL button allows the user to select and adjust an output 
audio level.  Pressing the PRESET button allows the user to select a preset to execute.  

Main operating page  without audio option

PRESET

MATRIXPRO-II

BARCO

The main screen is used to select the connection type, and which inputs and outputs are to be 
connected.  Pressing the VIDEO button sets the connection as a video connection. Pressing the 
AUDIO button sets the connection as a audio connection Pressing both the VIDEO and AUDIO 
buttons indicate that the connection will connect both the video and audio. The user may also press 
an input or output select button at this screen that would cause the matrix to go into connection 
mode. When connection mode is entered in that manner, the front panel will light both the audio and 
video lamps.

The user will normally press an input button fi rst, when that happens if the input is not split it will be