Canon S900 Benutzerhandbuch
7
Basic Printing
3.
Press down on the corners and sides
of the envelopes to make them as flat
as possible by expelling all of the air.
of the envelopes to make them as flat
as possible by expelling all of the air.
To avoid paper jams, make sure
envelopes are flat before you load
them into the paper tray.
envelopes are flat before you load
them into the paper tray.
Make sure that none of the flaps overlap. If the envelope edges
are not flat, crease them with the side of a pen.
are not flat, crease them with the side of a pen.
Do not allow more than 10 envelopes to stack on the paper rest
or output tray.
or output tray.
4.
With the address side facing up and
pointed in the direction shown in the
illustration, align the stack with the
right side of the sheet feeder, then
insert the stack into the printer.
pointed in the direction shown in the
illustration, align the stack with the
right side of the sheet feeder, then
insert the stack into the printer.
5.
Slide the paper guide right to the
edge of the envelopes until firmly in
place.
edge of the envelopes until firmly in
place.
Canceling a Print Job
There are several ways to cancel a print job in progress.
To cancel a print job from the printer:
You can cancel a print job from the printer while a
document is printing. Press the RESUME/CANCEL button
on the printer. The print job will be canceled and the
paper ejected.
document is printing. Press the RESUME/CANCEL button
on the printer. The print job will be canceled and the
paper ejected.
To cancel a print job from the BJ Status Monitor:
The BJ Status Monitor launches automatically when data is sent to the printer and
will appear as an icon on the taskbar.
will appear as an icon on the taskbar.
Address side of envelope faces up
RESUME/CANCEL
button
S900_QSG.book Page 7 Friday, November 2, 2001 1:34 PM