Canon S900 Benutzerhandbuch
Appendix
51
• Always grasp the plug when you unplug the power cord. Pulling on the power cord could damage the cord and
cause a fire or electric shock.
Never use an extension cord. To avoid a fire or electric shock, always plug the power cord
directly into the power outlet.
directly into the power outlet.
Never use a power supply voltage other than that supplied in the country where you purchased
the printer. Using incorrect voltage could cause a fire or electric shock. The correct power
supply voltage for this printer is AC 120V, 60 Hz.
the printer. Using incorrect voltage could cause a fire or electric shock. The correct power
supply voltage for this printer is AC 120V, 60 Hz.
Cleaning and Maintaining the Printer
Use only a slightly damp cloth to clean the printer. Never use flammable solvents such as
alcohol, benzene, or thinner. If a flammable solvent contacts an electrical component inside
the printer, a fire or electric shock could result.
alcohol, benzene, or thinner. If a flammable solvent contacts an electrical component inside
the printer, a fire or electric shock could result.
Always unplug the printer power cord before you clean the printer. If you mistakenly turn on the
printer while cleaning it, you could touch moving components inside the printer and suffer injury.
printer while cleaning it, you could touch moving components inside the printer and suffer injury.
Never attempt to disassemble or modify the printer. The printer contains high voltage
components which could cause a fire or serious electric shock.
components which could cause a fire or serious electric shock.
Working Around the Printer
Never use flammable sprays near the printer. Gases in the spray could cause a fire or electric
shock if they come in contact with electrical components inside the printer.
shock if they come in contact with electrical components inside the printer.
Never insert your fingers or hands inside the printer while it is printing. The printer contains
moving parts which could cause injury.
moving parts which could cause injury.
Never place anything on top of the printer, especially metal objects (such as paper clips,
staples), or containers with flammable solvents (such as alcohol, benzene or thinners).
Objects falling into the printer could cause a fire or electric shock.
staples), or containers with flammable solvents (such as alcohol, benzene or thinners).
Objects falling into the printer could cause a fire or electric shock.
If any foreign object, especially a piece of metal or liquid, falls into the printer, immediately
press the POWER button to turn off the printer, unplug the power cord, then call the Customer
Care Center. Continuing to use the printer after a foreign object has fallen into it could cause a
fire or electric shock.
press the POWER button to turn off the printer, unplug the power cord, then call the Customer
Care Center. Continuing to use the printer after a foreign object has fallen into it could cause a
fire or electric shock.
Printhead and Ink Tanks
For safety, always store printhead and ink tanks out of the reach of small children. If a child
accidentally licks or ingests any ink, consult a physician immediately.
accidentally licks or ingests any ink, consult a physician immediately.
Never subject a printhead or ink tank to shocks or excessive vibration. Shaking could cause
ink to leak and stain clothing.
ink to leak and stain clothing.
Never touch the printhead or electrical contacts on a printhead immediately after removing it
from the printer. These metal parts become very hot during printing and could cause minor
burns.
from the printer. These metal parts become very hot during printing and could cause minor
burns.
Turning the Printer Off
To avoid printer malfunction always use the POWER button to turn the printer on and off. Never remove the power
cord from the power outlet until you have turned off the printer by pressing the POWER button. After the POWER/
ERROR lamp goes out, you can unplug the power cord from the power outlet.
cord from the power outlet until you have turned off the printer by pressing the POWER button. After the POWER/
ERROR lamp goes out, you can unplug the power cord from the power outlet.
Using the Printer Near Appliances and Fluorescent Lamps
Allow at least 6 inches clearance between the printer and another appliance or a fluorescent lamp. Electrical
noise generated by a fluorescent lamp placed too close to the printer could cause the printer to malfunction.
noise generated by a fluorescent lamp placed too close to the printer could cause the printer to malfunction.
S900_QSG.book Page 51 Friday, November 2, 2001 1:34 PM