Canon MP800R Benutzerhandbuch

Chapter 4 

Photo Printing from Photo or Film

Slowly close the Document Cover and press [OK]. 

The film is scanned.

Let’s select a scanned photo and specify the number of prints, and print it.

„ Printing Photo Displayed on the LCD (Single-photo print)

Print a scanned photo.

Prepare for printing.

(1) Load paper.

See

“Loading Paper” on page 20

.

(2) Ensure that the proper paper source is selected.

See

“Changing the Paper Source” on page 24

.

(3) Scan a photo or a film.

See

“Scanning a Photo” on page 65

 or 

“Scanning a Film” on page 67

.

z Film is scanned in the order from left to right.
z Mount the film in the film guide with the upper edge of the photograph towards you to 

prevent the scanned photographs from being displayed upside down on the LCD. 
Depending on the model or brand of your camera, the scanning order may differ from the 
frame order of the film.

z The photo or film is rescanned before printing starts. Do not open the Document Cover or 

remove the photo or film from the Platen Glass until printing is complete.

z If the film was not scanned properly, see 

“Cannot Scan Films” on page 131

.

z Press [PHOTO/FILM] when loading another film. If <Do you want to clear the scanned 

photo?> appears on the LCD, select <Yes>, press [OK] to delete the previous image data, 
then go to main step 2.

Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when feeding paper from the 
Auto Sheet Feeder and the Cassette Lamp is lit when feeding paper from the Cassette.